Xerox 6050A, 6030 manual Procedure

3.4 Communication Parameter Setup (Print Services on Web, 6030/6050)

The communication parameters for TCP/IP, Serial, Centronics (optional), VPI (optional), and SNMP can be set up from Print Services on Web. These procedures are explained below.

• The machine must be rebooted for the changes to take effect.

•These procedures are performed in the Administrator Mode.

Procedure

1 Start Print Services on Web, enter the Administrator mode, and select

the [Properties] tab.

Refer to "2.3 Print Services on Web (6030/6050)" for details about starting Print Services on Web and logging on as Administrator.

The displayed [Print settings] were set up earlier using the selections on the [Print Setup] and the [Properties] tabs. The hardware configuration information is stored in the machine’s controller.

3.4 Communication Parameter Setup (Print Services on Web, 6030/6050) 75