Xerox 6050A, 6030 manual Poor Image Quality, 257

8.2 Poor Image Quality

Perform the following corrective measures if the copies or prints display one of

the image quality defects listed below.

Image Quality Defect	Corrective Measure
The print displays	Verify that the image density setting is correct.
excessive background	Check the quality of the original.
	• Reduce the image density setting.
	• Increase the background suppression setting.
Some parts of the image	Verify that the image density setting is correct.
did not print or are	• Change the image density setting.
blurred
	Determine if the media is damp.
	• Switch on the paper heater switch, if it is off.
	• Replace the damp media with new media.
	• Change the sharpness setting.
	Confirm that the size of the document does not
	exceed the limit.
	• Check the length and width of the document. If
	the size exceed the limit, split the document
	and copy it in sections.
	• Verify that sufficient memory is installed.
The print is wrinkled	Determine if the media is damp.
	• Switch on the paper heater switch, if it is off.
	• Replace the damp media with new media.

8.2 Poor Image Quality 257