Xerox 6030, 6050A manual Hpgl, Auto

TCP/IP

The communication parameter nomenclature on the printer control panel will sometimes differ from the nomenclature on Print Services on Web (6030/ 6050) or Web Printer Management Tool (6050A). The Print Service on Web and Web Printer Management Tool nomenclature appears in bold type in the table below.

The following TCP/IP communication parameters must be set up for the

6030/6050.

Menu Item		Description
Default Parser	Selects the parser or data format interpreter that
	will be used when the input data format has not
	been specified from among the available
	selections, that is, [HPGL], [VERSATEC], [TIFF],
	[CALS], or [PS/PDF]. The default setting is
	[HPGL].
Ethernet Setting	Selects the ethernet setting/physical layer. The
(Physical Layer)	default setting is [AUTO].
	[AUTO]	Automatic recognition
	[10BASE_T]	Fixed at 10BASE_T
	[100BASE_T]	Fixed at 100BASE_T
IP Address	The IP address of the machine in the format
	XXX.XXX.XXX.XXX. The IP address can be
	changed, if necessary.
MASK Value	The sub-net mask set up on the machine in the
(Net mask)	format XXX.XXX.XXX.XXX. The subnet mask can
	be changed, if necessary.
E-Net Address	Displays the Ethernet address. The value
(Ethernet address)	displayed is unique for the hardware and cannot
	be changed.
FTP	Determines whether or not to enable FTP. The
	default setting is [Enable].
Dynamic Routing	Determines if dynamic routing will be enabled.
	The default setting is [ON].
Static Routing*	Determines if static routing will be enabled. The
	default setting is [OFF]. Set Static Routing to [ON]
	when you need to view the device through a
	gateway or router.

3.1 Communication Parameters 61