Xerox 6050A, 6030 manual Other Problems, 258

8.3 Other Problems

Follow the instructions provided in the table to recover from the errors which are

listed.

Error	Recovery
Nothing is displayed on the	• Verify that the machine is connected to a
printer control panel.	correctly rated power supply, that the power
	plug is plugged in, and that the power switches
	and the circuit breaker switch are in the On
	positions.
	• Adjust the contrast of the touch screen.
It is not possible to insert	• Check the printer control panel for error
documents	messages or error codes.
	• Perform the corrective measures indicated on
	the control panels.
	• If the condition does not improve, contact your
	Service Representative.
Media jams occur	• Check for and remove loose pieces of media
frequently	from inside the machine.
	• Verify that the media is not curled, folded,
	wrinkled, or torn. Replace the media if any of
	these conditions apply.
	• Verify that the media is loaded correctly.
	Reload the media if necessary.
	• Verify that suitable media is being used. Only
	use paper recommended by your Service
	Representative.

258 Chapter 8 Problem Solving