Xerox 6050A manual Printer Control Panel Menu 6030/6050, 197

5.2 Printer Control Panel Menu (6030/6050)

The following is a list of the menus and submenus which can be accessed by pressing the <Menu> key and placing the printer in the offline mode. When the printer enters the offline mode, the first of two top level menus displays, that is, the [Network Port/Set] menu. From this menu the user can define the system parameters, perform port (communication) setup, run a test print (plot), manage job and error logs, set up reprinting (offline plot), and display billing meter information.

The second top level menu is [Print Setup]. It is accessed from the [Network Port/Set] item by pressing the [ ] key. This menu enables the user to define the roll and cut sheet media sizes, types, and weights, as necessary, when new or different media is loaded in the machine.

As a reminder, the following buttons are used to navigate the printer control panel menus.

<	> key	Displays the previous menu item or value on the same
		menu level.
<	> key	Displays the next menu item or value on the same menu
		level.
<	> key	Displays the lower level menu item.
<	> key	Displays the higher level menu item.

Table items that are preceded by an asterisk [*] represent the values that can be selected. Values which are followed by a [Ö] mark lead to another, lower level, submenu or selection; these are accessed by pressing the < > key, after pressing the <Set> key to accept the previous selection.

It is recommended that the procedures covered in this chapter be performed using Print Services on Web.

5.2 Printer Control Panel Menu (6030/6050) 197