Xerox 6050A, 6030 manual Description of the Configuration List Contents

Description of the Configuration List Contents

The contents of configuration list are explained below.

Displayed Item		Description
H/W CONFIG	Model	Product name
	Software Version	Installed version of the printer software
	RAM Total	Displays the amount of memory installed in the
		printer.
	Segment Memory	Displays the capacity of the area where spooled print
		data is stored during print processing.
	Work Memory	Displays the capacity of the area used for running the
		controller software.
	Frame Memory	Displays the capacity of the image memory (the area
		in which images developed into bit maps are stored.)
	Harddisk	Displays the model number of the hard disk on which
		the input data are spooled.
	Option H/W	Additional installed hardware device(s), such as a
		folder, stacker, etc.
	Finisher Model	Model number of the finisher
S/W CONFIG	PostScript	Enabled software option
	Network Scan	Disabled software option
	Key Install Key	Installation key number for the installed and enabled
		software option
PORT SETTING	ETHERNET	Ethernet settings
	TCP/IP	TCP/IP port settings
	SNMP	SNMP status
SYSTEM	All	The left column lists the available system
PARAMETER		parameters.
		The center column lists the current system parameter
		settings.
		The right column lists the possible settings for each
		of the system parameters.

96 Chapter 3 Printer Setup