Xerox 6030, 6050A manual 118

A3

A3

Output on the A3 roll media

Output image size

Rotated 90 degrees

Paper

A3

Output on the A2 roll media

Settings The settings for this function are as follows.

Menu Item	Description
Auto Mapping	Sets whether the automatic mapping functions is to be
	enabled or not.
	The output paper size that best matches the output image
	size will be determined automatically when this function is
	set to [Enable]. The values specified in paper mapping
	will be invalidated.
Size	The value entered here is used as the input size when
(fixed)	[Output] has been specified.
	The value entered here is used as the output size when
	[Media Type] has been specified.
	The paper size displayed will differ in accordance with the
	[Input size] parameter set for the Media series.
Output	Sets the size of the output image in relation to the input
	size (size mapping).
	The paper size selected will differ in accordance with the
	[Output size] parameter set for the Media series.
Paper	Sets the size of the paper that is to be actually output in
	relation to the output size when automatic mapping has
	been set to [NO] (media mapping).
	There are cases where the input image will be rotated for
	output purposes depending on the paper size specified
	here.
	The paper size selected will differ in accordance with the
	[Media size] parameter set for the Media series.

Refer to the section on "Media Series" for further details on paper groups.

118 Chapter 4 Logical Printer Setup and Operation (6030/6050 only)