Xerox 6050A manual Snmp 6030/6050 Only

SNMP (6030/6050 Only)

The communication parameters listed below must be set up.

SNMP must be set up in Print Services on Web.

The communication parameter nomenclature on the printer control panel will sometimes differ from the nomenclature on Print Services on Web. The Print Service on Web nomenclature appears in bold type in the table below.

Menu Item	Description
SNMP	Sets whether or not to enable SNMP.
Community	Sets the community String to be imbedded when the
String	client transmits SNMP packets.
Trap address	Sets the IP address of the destinations (trap transmission
	destinations) to which notifications are to be sent in the
	event of an error occurring with the printer.
	A maximum of 128 trap transmission destinations can be
	saved.
Transmission Port	Sets the port numbers of the trap transmission
(Send port)	destinations.
Version	Sets the version of the trap to be transmitted.
Permanence	Sets whether the trap transmission destination
(Persistence)	information is to be stored or not after the printer has
	been switched off. A maximum of eight items can be
	enabled for permanence.

68 Chapter 3 Printer Setup