Xerox 6050A, 6030 manual Serial Setup, Routing Table ADD

Static Routing

ON*

ROUTING TABLE ADD

Dest. Address 123. 000. 000. 000

Router Address 123. 000. 000. 000

Adding items to the routing table

1.Select [ON] for [Static Routing], and then press the <Set> key.

Now press the < > key.

2.Select [ADD] for the [ROUTING TABLE], and then press the < > key.

3.Enter the destination address, and then press the <Set> key.

After setting up the destination address, move the cursor to the right-hand side and press the < > key.

4.Enter the routing address, and then press the <Set> key.

To return to the previous menu, move the cursor to the left-hand side and press the < > key.

Serial Setup

PORT SETTING

SERIAL

SERIAL

Baud Rate

1

2

Display [SERIAL] on the setup item selection screen, and then press the < > key.

Select the item that is to be set up with the

use of the <	> and < > keys, and then
press the <	> key.

[Handshake], [Baud Rate], [Parity], [Data Bit], [Stop Bit], [EOP Timeout], [Output Response], and [Job Separation] will be displayed in that order.

3.2 Communication Parameter Setup (Printer Control Panel, 6030/6050) 71