Xerox 6050A manual 6030/6050 Printer Control Panel Example Procedure, Queued, All

Menu Item		Description
Sleep Mode	Sets the sleep mode to [ON] or [OFF] and sets the time
	(15 to 120 minutes) that must elapse after the previous
	copy or print job until the machine enters the sleep
	mode. The sleep mode switches off the power of the
	printer.
	The default setting is [90] minutes.
Attention Light	Not Available
Buzzer	Not Available
Print Density	Sets up the default print density level. The density
	setting is a numeric value between -99 and 99.
Job Recovery	Determines how the jobs that were in the print queue
	when the printer power was shut off will be processed
	when the printer is switched back on. The default
	setting is [OFF].
	[OFF]	Jobs that had not been output when
		the power was shut off are canceled
		(not printed).
	[QUEUED]	Prints out only the [Queued] jobs
		waiting to be processed.
	[ALL]	Prints out all jobs that have not been
		successfully completed.

• When [ALL] is selected, a ten-page job will be reprinted from page one when the power is restored, even if pages 1 to 9 had already printed before the power was shut off.

•The sequence in which jobs are printed after the power is restored is based on the ID numbers that were assigned when each job was received.

Net Cont. Time

Not available

6030/6050 Printer Control Panel Example Procedure

MENU

SYSTEM PARAMETER

SYSTEM PARAMETER Job Recovery

1

2

Press the < > key with [MENU]/[SYSTEM PARAMETER] displayed.

Scroll to the item you wish to set up using the < > and < > keys. [Set Date], [AUTO ROLL], [SPA PAPER WIDTH], [Smoothing], [Low power mode1], [Low power mode2],

80 Chapter 3 Printer Setup