Motorola VIP1003 overview, Installing, Front panel of models without display, Rear panel

VIP1003 overview

Front panel of models without display

INSTALLING

Connecting to broadband

Connect one end of the Ethernet cable to the connector marked ETHERNET on the rear panel of the set-top box and the other end to a hub or the Ethernet wall connector provided by your broadband operator.

Connecting to the TV set

Connect one end of the enclosed SCART cable to the SCART connector marked TV on the set-top box and the other end to your TV set.

Indicator LED:s

•Green light - the set-top box is operational.

•Flashing green light - the set-top box receives a signal from the remote control or a keyboard.

•Red light - the set-top box is in stand-by mode.

IR receiver

Receives signals from remote control and keyboard.

The marking plate is located on exterior of the bottom of the apparatus.

Both analog audio and standard definition video are sent to the TV set through this connection.

Rear panel

ETHERNET	USB	SCART (TV)
for broadband	for connection	for connection to TV set
connection	to external devices.	(analog Standard Definition video)

SPDIF	HDMI	POWER
for connection to digital	for connection to TV set	for connection of
audio equipment	(digital High Definition video)	external power supply

Broadband wall outlet or hub

6 7