Xerox 6050A, 6030 manual 140, Other, Mix, Long

Settings The settings for this function are as follows.

Menu Item

Media Size

Description

This parameter can be selected from [AUTO], [OTHER], [MIX], [MIX2], or any of the standard media sizes. The default setting is [AUTO].

[AUTO]	The standard shape priority mode. If the length
	of the document exceeds the standard size, the
	media is cut to the standard shape that has been
	increased in length.
[OTHER]	Synchronized cutting is performed on all images.
[MIX]	If images that are smaller than the A0 size
	exceed the standard size, the media is cut to the
	standard size that has been increased in length.
	Synchronized cutting is performed on all images
	that exceed the A0 size.
[MIX2]	If images that are smaller than the A0 size
	exceed the standard size, synchronized cutting
	is performed on all images.

The selection items for the media size will differ in accordance with the [Input size] parameter set for the Media series.

• Synchronized cutting is where the media is cut to the non-standard size that matches the length of the image.

•All printing is carried out on roll media when [OTHER] has been selected.

•Refer to the section on "Media Series" for further details on paper size series.

Menu Item		Description
Number of	Sets the number of copies to be printed consecutively in a
Fragments	range from 0 to 99 when [Paper Size] has been specified. The
	default setting is [0].
	A value that subtracts 1 from the length of the standard size
	will be set for [Connect]. For example, in the event of 4A3, 3
	will be set for the [Connect].
Lead and	Specifies whether or not margins will be added. The default
Trail Margins	setting is [No].
	[NO]	No margins will be added.
	[ALL]	Top and bottom margins will be added to all data.
	[LONG]	Top and bottom margins will be added to long
	images.
Lead Margin	Sets the top margin in a range from 0 to 999 mm when the
	[Margin] parameter is set to [ALL] or [LONG].
Trail Margin	Sets the bottom margin in a range from 0 to 999 mm when the
	[Margin] parameter is set to [ALL] or [LONG].

140 Chapter 4 Logical Printer Setup and Operation (6030/6050 only)