Xerox 6050A manual Appendix 2 HP-GL/HP-GL2 Command List 6030/6050

Com-	Command Meaning and action	HP-GL	HP-GL/2	6030/6050
mand				Wide Format
BP	Instructs the start of plotting. Outputs a label by		y	y
	overlaying on job log and plot output.
CA	Sets an auxiliary character set.	y		y
CC	Specifies character smoothness.	y		n
CF	Specifies an outline font rendering method.		y	n
CI	Plots a circle of an arbitrary radius.	y	y	y
CM	Specifies the handling of character set modes	y		n
	and undefined characters.
CP	Draws a character.	y	y	y
CR	Sets an RGB data range.		y	y
CS	Sets a standard character set.	y		y
CT	Specifies an arc division method.	y	y	y
CV	Controls the curve line generator.	y		n
DC	Terminates the digitize mode.	y	y	n
DF	Resets the printer to the default status.	y	y	y
DI	Specifies the character string direction by	y	y	y
	absolute values.
DL	Downloads a user-defined character set.	y		y
DP	Reads the coordinates of a point to be digitized.	y	y	n
DR	Specifies the character string direction by	y	y	y
	relative values.
DS	Sets a character set to a slot.	y		n
DT	Defines character or code to terminate label	y	y	y
	drawing.
DV	Specifies a text path to the right or left or upward	y	y	y
	or downward.
EA	Draws a square determined by the current pen	y	y	y
	position and the specified X and Y coordinates.
EC	Cuts paper.	y	y	n
EP	Draws a polygon registered in the polygon	y	y	y
	buffer.
ER	Draws a square determined by the current pen	y	y	y
	position and relative coordinates from the point.

Appendix 2 HP-GL/HP-GL2 Command List (6030/6050) 5