Xerox 6050A, 6030 manual Split Drawing, 134

Split Drawing

When an image exceeds 1,189mm in length, it can be split (fragmented) and printed in sections. This function also enables you to add positioning marks on each split section. A maximum of 30 such sections is possible.

Fragment

lengthFragment length

1/3 2/3

3/3

Settings The settings for Split Drawing are as follows.

Item	Description
Split drawing	Set to either [Do not split] or [Split].
mode	The default setting is [Do not split].
Split length	Sets the print length within a range of 1,189 to 3,000 mm.
	The default settings is [1,189 mm].
Page number	Determines whether or not a page number will be printed.
printing	The page number will be printed in the format [present
	page number:total number of pages].
	The default setting is [Off].

134 Chapter 4 Logical Printer Setup and Operation (6030/6050 only)