Xerox 6050A, 6030 manual Document Size Input, Media Size Output

• Refer to "3.8 System Parameter Setup (Print Services on Web, 6030/6050)" for details on setting up the logical printer extensions.

•Refer to "4.1 Creating a New Logical Printer" for help in setting up logical printers.

Document Size Input

The following two methods are available for judging the size of the input document:

• Automatic Calculates the coordinates of the input document and automatically selects the closest size.

•Size SpecificationEnables the user to manually select the media size of the input image. The media size can be selected from standard sizes and user-defined sizes.

The Automatic setting is used under normal circumstances. Specify the size manually if restrictions are to be placed on the input coordinates. When the size is specified, all areas that exceed that size will be cut off.

Refer to the "Input Option" section of "4.3 Logical Printer Print Settings" for details on available functions.

Media Size Output

The following two methods for judging the size of the output media are available:

• Automatic When Automatic is selected, the print size is enlarged or reduced automatically based on a size mapping table (explained later). Also, the size of the media that is selected is determined based on a media mapping table, or by automatic mapping (explained later).

•Size SpecificationWhen Size Specification is selected, the output media size is specified manually. If the specified media size is different from the input document size, the document will be enlarged or reduced to match the size of the paper.

"Automatic" is used under normal circumstances. Specify the media size manually if all output is to be printed on a single media size.

Refer to "4.3 Logical Printer Print Settings" for details on available functions.

2.1 Overview of the 6030/6050/6050A Wide Format Printer 39