Xerox 6050A, 6030 manual 230, Aix

AIX 3.2.X

For AIX 3.2.X, register the remote printer in the [/etc/qconfig] file defining the

printer- unique attributes.

For details on the respective operations and content, see "AIX 3.2.X User

Guide."

•Editing the /etc/qconfig file

In the example below, 6050A called [oklahoma] is registered in the [/etc/qconfig]

file.

With this setting, when you send a file to a printer device called raw, the file is

sent to [oklahoma].

plt10h: Name (Accxes6050A) host = oklahoma

s_statfilter = /usr/lpd/bsdshort l_statfilter = /usr/lpd/bsdlong rq = PLT10H

device = dplt10hdplt10h: backend = /usr/lpd/rembak

*

plt20h:

host = oklahoma

s_statfilter = /usr/lpd/bsdshort l_statfilter = /usr/lpd/bsdlong rq = PLT20H

device = dplt20hdplt20h: backend = /usr/lpd/rembak

*

Be sure to specify a logical printer prepared in the 6030/6050 Wide Format printer system using rq.

•Starting the Print Queue

After finishing the settings, start the print queue using the qadm command.

Setting the MAC frame format

The Ethernet supports two MAC frame formats [Ethernet V2.0] and [IEEE802.3], but the Xerox 6030/6050 Wide Format printer system supports [Ethernet V2.0] only. When setting the MAC frame format in the host computer, specify [Ethernet V2.0].

230 Chapter 6 Ethernet Print Service (for UNIX)