Xerox 6030, 6050A Reduction and Enlargement Using Size Mapping, 169, Input Size Output Size

Reduction and Enlargement Using Size Mapping

Reduction and enlargement can be performed using the size mapping table. The size mapping table establishes relationships between input image sizes and output image sizes. It enables users to enlarge or reduce prints automatically.

The size mapping table is set up using the logical printer’s [Size/media mapping] selection. [Auto scale] is set to [Enable] and [Media size] (on [Output Option]) is set to automatic ([AUTO], [OTHER], [MIX], or [MIX2]).

If the size mapping table is set up as shown below, an image with an input size of A3 will be enlarged to an A2 size (141.4%).

[PLT01H] logical printer settings

Input Size	Output Size
A0	A0
A1	A1
A2	A2
A3	A2
A4	A4

A3

A2

Input image Output image

In addition, if the output media size is directly specified with [Output Option] and [Auto scale] is set to [Enable], it is possible to enlarge or reduce the image so that it matches the size of the output media when the input size and output size are different.

4.4 Logical Printer Operations 169