Xerox 6050A, 6030 manual Setting Up Replot, Setting Up Print Density

3 Press the [Apply] button to save the new setting, [Cancel] to revert to the existing setting, or [Reset to default] to return to the factory default setting.

Setting Up [Replot]

1 Select [Replot] from the [System parameters] menu. The Replot setup selections will display in the right pane.

2 The parameter is enabled by default. De-select the checkbox to disable the feature. Disabling the feature will render the reprinting function inoperative.

3 Press the [Apply] button to save the new setting, [Cancel] to revert to the existing setting, or [Reset to default] to return to the factory default setting.

Setting Up [Print Density]

1 Select [Print density] from the [System parameters] menu. The Print density selections will display in the right pane.

3.8 System Parameter Setup (Print Services on Web, 6030/6050) 87