Xerox 6050A, 6030 manual Disconnect Device, Operational Safety Information

Disconnect Device

The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a plug-in device. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet.

Operational Safety Information

Xerox equipment and supplies have been designed and tested to meet strict safety requirements. These include safety agency examination, approval and com- pliance with established environmental standards. To ensure the continued safe operation of your Xerox/Fuji Xerox equipment, follow these safety guidelines at all times.

Do These:

•Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked by a qualified electrician.

•Always locate the machine on a solid support surface (not on plush carpet) that has adequate strength to support the weight of the machine.

•This equipment must be connected to a protective earth circuit.

This equipment is supplied with a plug that has a protective earth pin. This plug will fit only into an earthed electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your electrician to replace the electrical outlet if you are unable to insert the plug into it. Never use a plug that lacks an earth connection terminal to connect the product to an electrical outlet.

•Always follow all warnings and instructions that are marked on or supplied with the equipment.

•Always exercise care when moving or relocating equipment. Please contact your local Xerox/ Fuji Xerox Service Department, or your local support organization to arrange relocation of the product to a location outside of your building.

•Always locate the equipment in an area that has adequate ventilation, and the room for servicing. See the Install guide for minimum dimensions.

•Always use materials and supplies specifically designed for your Xerox/Fuji Xerox equipment. Use of unsuitable materials may result in poor performance.

•Always unplug this equipment from the electrical outlet before cleaning.

Do Not Do These:

•Never use a plug that lacks an earth connection terminal to connect the product to an electrical outlet.

•Never attempt any maintenance function that is not specifically described in this documentation.

•This equipment should not be placed in a built-in installation unless proper ventilation is provided, please contact your Authorized local dealer for further information.

vi Safety Notes