Xerox 6050A, 6030 manual

3

While pulling on the lever located in the end of the roll paper shaft, remove the paper core in the direction of the arrow.

Pulling the lever releases the lock and allows the roll to be removed from the shaft.

There is an area at the front of the tray on which the roll paper can be placed.

4 While pulling the lever located in the end of the roll paper shaft, align the roll paper with the paper size marks on the shaft and set the roll in place.

5

Align the roll paper following the directions displayed inside the media tray and load the roll on the shaft guide.

Cut the lead edge of the media before setting it in place if it is damaged. Refer to "1.11 Cutting Roll Media" for details on how to do this.

18