Xerox 6050A manual Message List 6030/6050 only, 249

Message List (6030/6050 only)

This section explains messages that may be displayed during printing using the lpr command. These messages depend on the system because they are output from the client workstation.

Cannot create /usr/spool/pltXXX/.seq

Status: The lpd daemon on the client failed to create a control file.

Action: Check the spool directory.

Copy file is too large

Status: The data is too large to store in the spool directory.

Action: Extend the spool directory area or attach the [-s] flag, then execute the lpr command using a symbolic link.

XXprinter:Jobs queued, but cannot start daemon

Status: Cannot start the lpd daemon on the client.

Action: Restart the daemon by the lpr command.

XXprinter:Printer queue is disabled

Status: The queue is stopped.

Action: Restart the daemon by the lpr command.

XXprinter:Unknown printer

Status: A printer that is not registered in the system was specified.

Action: Check the printer registration in the [/etc/printcap] file.

jobXX can not dequeue

Status: Failed to delete job No.XX in the print service queue.

Action: Check by the lpq command whether the specified job has already changed from the wait status in the queue to the processing status.

6.5 Printing Using the lp/lpr Command 249