Xerox 6030, 6050A manual Printer Setup

2 Select the interface or protocol ([TCP/IP], [Serial], [Centro], [VPI], [SNMP]) to be set up from the [System parameters] menu.

The setup selections will display in the right-hand pane of the window. In the example below, [Serial] has been selected.

• Only standard features and installed options are listed in the [System parameters] menu. [VPI] and/or [Centro] will be listed if one or both of these options is installed.

• Refer to the section " Communication Parameters Definitions" in "3.1 Communication Parameters" for more information about the communication parameter entries.

3 Set up each of the parameters as required, and then select the [Apply] button.

76 Chapter 3 Printer Setup