Xerox 6030 manual System Settings Setup Printer Control Panel, 6050A

3.7 System Settings Setup (Printer Control

Panel, 6050A)

The following system parameters can be set up from the printer control panel.

• Refer to "2.2 Printer Control Panel Usage" for detailed instructions on printer control panel operations.

Menu Item	Description
TCP/IP	Allows the entering of an IP Address, IP Subnet Mask
	and an IP Gateway address. Also allows DHCP and
	RARP/BOOTP to be enabled or disabled.
Date/Time	Sets up the internal clock. The parameters are set in
	the order year, month, day, hour, and minutes.
Timers	This encompasses both low power mode and sleep
	mode.
	Low power mode sets the time (15-240 minutes) that
	must elapse following a print job before the machine
	enters low power mode, reducing the temperature of
	the fuser and decreasing power consumption.
	The default setting is [15] minutes.
	The sleep mode sets the time (15-240 minutes) that
	must elapse following a print job until the machine
	enters the sleep mode; switching off power to the
	printer.
	The default setting is [55] minutes.

82 Chapter 3 Printer Setup