Xerox 6050A, 6030 manual 189

The following messages are displayed for the IOT status.

Displayed Item	Description
Idle	The printer is in standby mode, ready to receive a
	print job.
Printing	The printer is printing.
Warm-up	The printer is warming up.
Power off	The printer is powered off.
Lower power mode	The printer is in the low power mode.
Sleep mode	The printer is in the sleep mode.
Machine error	An error has occurred in the machine. Simultaneously
	press the <> and <> buttons on the printer control
	panel. If the machine does not recover, contact your
	Xerox Service Representative.
Paper jam	Media is jammed inside the printer. Follow the
	instructions on the control panel to remove the
	jammed media.
Check the printer	Follow the instructions on the control panel.
Door / tray open	A cover, tray, or door is open. Close it.
No media	The printer is out of media. Load the required media.
System error	A system error has occurred in the printer. Switch off
	the printer power, and then switch it on again. If the
	problem does not recover, contact your Xerox
	Service Representative.

4.6 Print Services on Web: Status 189