Xerox 6030, 6050A manual Size Mapping, Media Mapping/Automatic Mapping

Size Mapping

Size mapping is the process of setting up a table that establishes relationships between input document sizes and output image sizes. When size mapping is finished (must be done prior to printing), documents can be enlarged or reduced automatically based on the table entries.

A2

Input document size

Enlarge

Reduce

A1

A3

Output image size

Refer to " Size/Media Mapping" in "4.3 Logical Printer Print Settings" for more details.

Media Mapping/Automatic Mapping

Media mapping is the process of setting up a table that establishes relationships between output image sizes and media sizes. This process, like size mapping, must be performed prior to printing. Once the media mapping table is finished, the media size is determined by the entries in the media mapping table.

When Automatic Mapping is selected, the output media size that matches the output image size will be selected.

Check media mapping to be sure the media size selected matches the media loaded in the printer. Refer to "4.3 Logical Printer Print Settings" for more details.

A3

A3

Output on A3 roll media

Output document size

Rotated 90 degrees

Paper

A3

Output on A2 roll media

40 Chapter 2 Printer Overview