Xerox 6050A, 6030 manual 164

PS/PDF Option

The available selections set up the default media size, roll, and DMS for PS/PDF data.

Settings The settings for this function are as follows.

Menu Item	Description
Default Media	If media size information is not included in the print data, and
Size	no media is loaded in any trays, the page size of the data will
	be the selected media size.
	The default setting is [ISO_A0].
Default Media	If media size information is not included in the print data, the
Source	page size of the data will be the selected media size.
	The default setting is [ROLL 1].
Default DMS	If a DMS is not specified in the print data, the page size of
	the data will be the media size specified on the logical
	printer. The available settings are [ENABLE] and [DISABLE].
	The default setting is [DISABLE].
Plot Area	This selection sets up the printable area.
	The default setting is [Normal].
	[Normal] Adds 4 mm margins to the top, bottom, left, and
	right sides of the media. Print data is placed inside the
	margins.
	[Extend] No margins are added. Images will be printed to the
	edge of the page.

164 Chapter 4 Logical Printer Setup and Operation (6030/6050 only)