Xerox 6050A, 6030 manual Emergency Power Off

WARNING - Electrical Safety Information

CAUTION

Ensure that the power connection for your machine satisfies these require-

ments

•Use only the power cord supplied with this equipment.

•The socket outlet shall be installed near the equipment and shall be easily accessible.

•Plug the power cord directly into a grounded electrical outlet. Do not use an extension cord. If you do not know whether or not an outlet is grounded, consult a qualified electrician.

•This equipment is to be used on a dedicated 20A, 208-240 Vac 60Hz circuit or 16A, 220-240 Vac 50Hz circuit. The equipment must be connected to a grounded main outlet. If this machine needs to be moved to a different location, contact a Xerox service representative or your authorized local representative or service support organization.

•Improper connection of the equipment-grounding conductor can result in electrical shock.

•Do not place this equipment where people might step on or trip on the power cord.

•Do not place objects on the power cord.

•Do not override or disable electrical or mechanical interlocks.

•Do not obstruct the ventilation openings.

•Never push objects of any kind into slots or openings on this equipment.

Emergency Power Off

If any of the following conditions occur, switch off the power to the machine imme- diately and disconnect the power cord from the electrical outlet. Call an authorized local service representative to correct the problem.

•The equipment emits unusual noise or odors.

•The power cord is damaged or frayed.

•A wall panel circuit breaker, fuse, or other safety device has been tripped.

•Liquid is spilled into the copier/printer.

•The equipment is exposed to water.

•Any part of the equipment is damaged.

The only method to remove all power from the machine is to disconnect the power cord plug from the electrical outlet.

Safety Notes v