Xerox 6050A Cutting Roll Media, Manual cut Open the media tray and slide the cutter manually

1.11 Cutting Roll Media

The lead edge of the media should be cut when the media is loaded, on recovery from a media jam, and when the lead edge of the roll is damaged. There are two methods for cutting the lead edge of the roll media:

•Automatic cut: This involves making selections on the printer control panel.

Refer to the section "5.7 Billing Meter Confirmation (6030/6050)" for the 6030/6050 and "5.8 Billing Meter Confirmation (6050A)" for the 6050A in "Chapter 5 Additional Operations from the Printer Menu" for details about automatic cutting.

• Manual cut: Open the media tray and slide the cutter manually.

Refer to section " Cutting Roll Media Manually" in this chapter.

24