Xerox 6050A, 6030 manual Assigns a defined RGB parameter to Index Number, An index number

Command name	Command	Command Meaning and function	Limit
Set Blue Parameter	ESC * v # cC	Defines the blue color configuration of	Only
		the color palette.	concatenation
			command valid
Assign Color Index	ESC * v # iI	Assigns a defined RGB parameter to	Index Number
Number		an index number.
Push/Pop Palette	ESC * p # P	Saves and restores palette	Ignored
		information.
Start Raster	ESC * r # aA	Sets the controller to the raster mode
Graphics		and sets the start position and left
		margin of a graphic image.
End Raster Graphics	ESC * r C	Indicates the end of raster graphic
		image transfer.
Transfer Raster Data	ESC * b # V[data]	Transfer's the data of a specified byte.	Data skipped
by Plane		However, the CAP does not move to
		the next raster position.
		The plane pointer is updated but the
		row pointer is not.
Transfer Raster Data	ESC * b #	Transfer's the data of a specified byte
by Row/Block	W[data]	as a line or as a block by the current
		compression method.
Set Compression	ESC * b # mM	Determines the compression method.
Method
Source Raster Width	ESC * r # sS	Indicates the image width of
		succeeding raster data.
Source Raster	ESC * r # tT	Indicates the source raster image
Height		height of succeeding raster data.
Move CAP	ESC & a # hH	Moves the CAP horizontally by a
Horizontal		specified decipoint (1/720 inch).
(Decipoint)
Move CAP	ESC * p # xX	Moves the CAP horizontally by a
Horizontal		specified value in Versatec resolution
		inch units.
Move CAP Vertical	ESC * p # yY	Moves the CAP vertically by a
		specified value in Versatec resolution
		inch units.
Y Offset	ESC * b # yY	Moves the CAP vertically by specified
		pixel rows.

Appendix 3 HP-RTL Command List (6030/6050) 11