Xerox 6050A, 6030 manual Changing Output Roll Media for an Entire Job, 168, Image Size Media Size

Changing Output Roll Media for an Entire Job

By setting the [Output Option] [Size] selection to [AUTO], the output media is determined by the settings in the logical printer's [Media mapping] table. If a media mapping table is prepared for each job, the output roll media can be changed for each job.

For example, if an A1 roll and an A2 roll are loaded in the machine, and the A2 roll is to be used for printing the A2 size (Job1) job, and the A1 roll media to be used for printing (Job2), which is also in A2 size, the mapping table is set up as follows.

[PLT01H] logical printer settings

Image Size	Media Size
A0	A0
A1	A1
A2	A2
A3	A3
A4	A4

[PLT02H] logical printer settings

Image Size	Media Size
A0	A0
A1	A1
A2	A1
A3	A3
A4	A3

In this example, (Job1) is specified to use logical printer [PLT01H], which will output the job on the A2 roll media.

(Job2) is specified to use logical printer [PLT02H] and rotate the job 90 degrees to print on the A1 roll media.

	A2	Logical printer
Job1		[PLT01H] specified

Output on the A2 roll media

Job2

A2

Logical printer [PLT02H] specified

Rotated by 90 degrees

Output on the A1 roll media

168 Chapter 4 Logical Printer Setup and Operation (6030/6050 only)