Xerox 6030 Communication Parameter Setup Printer Control Panel, 6050A, Menu System Settings

3.3 Communication Parameter Setup

(Printer Control Panel, 6050A)

This section explains the procedures for setting up the communication parameters from the printer control panel.

Procedure

MENU

SYSTEM SETTINGS

1 Press the <Menu> key and press the < > button two times to navigate to the [SYSTEM SETTINGS] menu. Then press the < > key.

SYSTEM SETTINGS TCP/IP

2

3

4

[TCP/IP] is the only available interface on the 6050A. Press the < > key.

Five menu options can now be selected from by pressing the < > and < > keys. [IP ADDRESS], [IP SUBNET MASK], [IP GATEWAY], [DHCP], and [RARP/BOOTP] in that order.

If [IP ADDRESS], [IP SUBNET MASK] and [IP GATEWAY] are selected, their

respective IP addresses can be manually set on the printer after pressing the < > key.

•Refer to the section TCP/IP Setup in "3.2 Communication Parameter Setup (Printer Control Panel, 6030/6050)" for information on how to set the [IP ADDRESS], [IP SUBNET MASK], and [IP GATEWAY] IP addresses..

5 [DHCP] and [RARP/BOOTP] have the option of either being enabled or disabled. This is done by first pressing the < > key while [DHCP] or [RARP/BOOTP] is selected, and then pressing the < > and < > buttons to toggle between [ENABLE] and [DISABLE].

74 Chapter 3 Printer Setup