Xerox 6030, 6050A manual Define Multi Pen, 151

Define Multi Pen

Sets up the line width, color, end style, and joint style pen attributes for HP-GL data for multiple pens. The same parameters will be set for all other pen numbers within the specified range.

Settings

The settings for this function are as follows.

Menu Item	Description
Pen No.	Specifies the starting number and the ending number that
	cover the range of pens that are to be set up. The pen
	numbers are set within a range of 0 to 98.
Width	Sets the line width within a range of 0 to 511, where a line
	width of
	1 = 0.0635 mm. The actual width of the line will be n ⋅
	0.0635, with the line width set to n. The default setting is [2].
	Text may not print cleanly if the line width is set to [1].
Color	Sets the line color at [BLACK] or [WHITE].
	The default setting is [BLACK].
End style	Sets the end of the line to [SQUARE], [ROUND], [EXTEND]
	or [TRIANGLE]. The default setting is [SQUARE].
	Refer to "End style" for further details.
Joint style	Sets joint processing for lines to [MITER], [ROUND],
	[UNJOINT], [BEVEL], [TRIANGLE], or [MITERED/
	BEVELED]. The default setting is [MITER].
	Refer to "Joint style" for further details.
	This setting is only valid for HP-GL and HP-GL/2 EA,
	EP, ER, FP, RA, RR and PE.

4.3 Logical Printer Print Settings 151