Xerox 6030, 6050A manual 232, Specify the bin subcommand for a data format

3 Enter the password of the user logged in at Step 2.

If the user information registered in the Xerox 6030/6050 Wide Format matches the logged-in user password, the login acceptance message is displayed.

Password:

230 User logged in ftp>

The password of the user (ftpusr) is [ftpusr] at shipping.

4 Specify a logical printer (example: plt00h). Enter the logical printer name using the cd subcommand.

A message indicating that the logical printer has been set will be displayed.

ftp> cd plt00h

250Changed directory to "/ata0-p1/plt00h"

ftp>

5 Specify the bin subcommand for a data format.

ftp> bin

200 Type set to A, bin mode ftp>

The ascii subcommand can be specified only for HP-GL data. Specify the bin subcommand for HP-GL/2, HP-RTL, Versatec, TIFF, and CALS data. The bin subcommand can also be specified for HP-GL data.

6 Enter a print file name (example: kikai_01.hp) using the send or put subcommand.

A message indicating that the transferred port has been set will be displayed. A message indicating the file name, and a message indicating the transfer data volume and time depend on the client-side application.

ftp> sendplans_01.hp 200 Port set okay

150 Opening ASCII mode data connection

226 Transfer complete

local: plans_01.hp remote: plans_01.hp

17720 bytes sent in 0.14 seconds (1.2e+02 Kbytes/s) ftp>

232 Chapter 6 Ethernet Print Service (for UNIX)