Xerox 6050A manual VPI optional, 6030/6050 Only, Report, Offline

VPI (optional, 6030/6050 Only)

The following VPI communication parameters must be set up.

Menu Item		Description
REPORT	Determines if the host will be notified offline of the media
OFFLINE	running out.
	The default setting is [NO].
	[YES]	Issues offline notification.
	[NO]	Does not issue offline notification.
EOP Timeout	Determines if the EOP Timeout will be enabled [TIMEOUT]
	or disabled [NO_TIMEOUT]. If set to [TIMEOUT], a
	Timeout Value must be entered. The timeout value is
	entered within a range of 1 to 255* seconds.
	The default setting is [10 sec].
Job Separation	Sets the job separation. The default setting is [NO].
	[YES]	Starts conversion processing once the
		command that recognizes the end of the data is
		received, even if this occurs midway through
		the file.
	[NO]	Performs the spooling process on the hard disk
		until a timeout is issued.

*If a value higher than [255] is entered for the timeout value, [255] will be set as the value.

3.1 Communication Parameters 67