Xerox System Parameter Setup Printer Control Panel, 6030/6050, Auto Roll, SPA Paper Width

3.6 System Parameter Setup (Printer

Control Panel, 6030/6050)

The following system parameters can be set up from the printer control panel.

These parameters can be set up on the copier control panel on the Xerox 6030/6050 Copier/Printers. If the parameters are set up on both the printer control panel and the copier control panel, the most recent settings will take precedence.

• Refer to "2.2 Printer Control Panel Usage" for detailed instructions on printer control panel operations.

Menu Item		Description
Set Date	Sets up the internal clock. The parameters are set in
	the order year, month, day, hour, and minutes.
AUTO ROLL	Determines whether the automatic paper switching
	function from the roll to the tray and tray to the roll is
	[ON] or [OFF].
	The default setting is [OFF].
SPA PAPER WIDTH	Sets the paper width for SP. JIS/ISO A paper. The
	default value is [SP A1].
	[SP. A1]	620 or 625mm
	[SP. A2]	435 or 440mm
Smoothing	Determines whether 1200 dpi smoothing will be [ON] or
	[OFF]. The default setting is [OFF].
Low power mode1	Sets the time (1 to 120 minutes) that must elapse
	following a copy or print job before the machine enters
	the Low power mode 1. Low power mode 1 reduces
	the temperature of the fuser, decreasing power
	consumption.
	The default setting is [5] minutes.
Low power mode2	Sets the time (5 to 120 minutes) that must elapse
	following a copy or print job before the machine enters
	low power mode 2. Low power mode 2 reduces the
	fuser temperature more than low power mode 1.
	The default setting is [15] minutes.

3.6 System Parameter Setup (Printer Control Panel, 6030/6050) 79