Xerox 6030, 6050A manual Output Option, 139

Output Option

Sets up the output size. The following two judgment methods are available for output image size.

•Automatic (AUTO, OTHER, MIX, MIX2)

Determines the most suitable output size based on the input size and the size mapping table. It also determines the roll media size to use based on the output size and the media mapping table (or automatically.)

•Specify Size

Enables the media size of the input image to be entered directly. The media size can be selected from standard sizes and user-defined sizes.

This is usually set to [AUTO]. However, it is possible to specify the media size if the same size will be used for all jobs.

The image will be enlarged or reduced if the input size and output media size are different.

The image will not be enlarged or reduced if the [Auto Scale] selection has been set to [NO] for the [Transform] function.

Refer to "Size/Media Mapping" for more information about size and media mapping.

4.3 Logical Printer Print Settings 139