Xerox 6030, 6050A manual Setting Up Paper Width for Special a

2 Enter a positive or a negative number between -99 and +99 to set up the default print density. Larger negative numbers lighten the prints. Higher positive numbers darken the prints. The factory default setting is [0].

3 Press the [Apply] button to save the new setting, [Cancel] to revert to the existing setting, or [Reset to default] to return to the factory default setting.

Setting Up [Paper Width for Special A]

1 Select [Paper Width for Special A] from the [System parameters] menu. The Paper Width for Special A selections will display in the right pane.

88 Chapter 3 Printer Setup