Xerox 6050A, 6030 manual Print Setup Menu, Setting Up Media, 215, Tray, Fuser

5.9 Print Setup Menu

This section explains the items which can be set up from the [PRINT SETUP] Menu on the printer control panel.

Menu Item	Description
Media	Sets up the type, size, weight, and other
	parameters for the media that are loaded in the
	machine.
Tray	Used to isolate the system from the machine
	settings when a fault occurs with optional rolls 3
	and 4.
	Consult with your Service
	Representative before changing this
	setting.
Fuser	Used to switch the temperature of the fuser.
	Consult with your Service
	Representative before changing this
	setting.
	This menu item, while still present in the 6050A UI
	does not have any effect on the fuser operation.

Setting Up Media

The media type, weight, and size series must be set up whenever you load new media in the machine or change the type and/or size of the media in the trays or in the MSI/(Multi Sheet Inserter/Manual Feed Bypass). These settings can be made at the printer control panel using the Print Setup menu.

5.9 Print Setup Menu 215