Control console
After you log on at the control console, as described in “Local access to the control console” on page 12 or “Remote access to the control console” on page 13:
1.Choose Network from the Control Console menu.
2.Choose TCP/IP from the Network menu.
3.If you are not using a BOOTP or DHCP server to configure the TCP/IP settings, select the Boot Mode menu. Select Manual boot mode, and then press ESC to return to the TCP/IP menu. Set the System IP, Subnet Mask, and Default Gateway address values.(Changes will take effect when you log off.)
4.Press CTRL+C to exit to the Control Console menu.
5.Log off (option 4 in the Control Console menu).
If you disconnected a cable during the procedure described in “Local access to the control console” on page 12,
Note reconnect that cable and restart the associated service.
14 | Metered Rack Power Distribution Unit |