APC pdu0123b, AP7820 manual Pdu0352a

Page 9

Horizontal mounting. You can mount the PDU in

a19-inch NetShelter or other EIA-310-D standard

19-inch rack:

1.Choose a mounting position for the PDU with either the display or the rear facing out of the enclosure.

2.Attach the mounting brackets to the PDU, using the flat-head screws (provided).

pdu0352a

3. Choose a location for the unit:

The unit occupies one U-space. A notched hole (or a number, on newer enclosures) on the enclosure’s vertical

Note rail indicates the middle of a U-space.

a.Insert cage nuts (provided with the enclosure) above and below a notched hole on each vertical mounting rail in your cho- sen location.

b.Align the mounting holes of the brackets with the installed cage nuts. Insert and tighten screws.

pdu0353a

Metered Rack Power Distribution Unit

5

Image 9

Contents Installation Instrukcja Obsługi w jezyku polskim jest dostepna na CD Contents Page Preliminary Information FeaturesDisplay interface Receiving inspectionInstall the PDU Attach the cord retention traysAttach cords to the tray Toolless mounting Mounting optionsBracket mounting Pdu0352a Pdu0369a Amps Display Interface OperationQuick Configuration TCP/IP configuration methodsOverview Bootp & Dhcp configuration APC Device IP Configuration WizardSee also Option 43 = 01 04 31 41 50 Local access to the control console Use apc for both user name and password Remote access to the control consoleChoose Network from the Control Console menu Control consoleWeb interface Access a Configured PDUSnmp Telnet and SSHManaging the security of your system FTP and SCPHow to Recover From a Lost Password How to Update Firmware Limited warranty Warranty and ServiceWarranty limitations Obtaining serviceMetered Rack Power Distribution Unit Life-Support Policy General policyExamples of life-support devices Page 990-1903B-00105/2006 APC Worldwide Customer Support