Remove power distribution modules PDMs

6Slide the PDM into the panel using the top and bottom guide tracks for that position. Make sure you slide the PDM all the way into its position.

7Close the latch. This will tighten electrical contacts in the PDM against the busbar.

8Feed cable from the PDM through the slot in the roof of the PDU.

Note: Leave a minimum of 7 inches (178 mm) of slack in the cable behind the module. The slack is useful in case the module is ever removed or replaced. 10 to 20 inches (254 to 508 mm) is recommended but space restrictions in the PDU and cable diameter size will cause the amount of slack to necessarily vary. Note: When installing PDMs near the top of the panel, perform step 8 before steps 6 and 7 to avoid cable congestion between the panel and the slot.

6 6

pdx0298b

pdx0839a

9Set all breakers on the newly installed PDM to the ON (closed) position.

Close the front door of the PDU.

Connect the PDM cable to the appropriate rack-mount PDU or other equipment

Remove power distribution modules (PDMs)

Reverse the installation procedure to remove a PDM (making sure all breakers on the module are OFF).

Install filler plates

pdx0840a

OFF position

ON position

Install APC filler plates (part number 870-14628) to properly cover 3-pole panel positions that are not occupied by a power distribution module.

150/175kw Modular PDU Installation

175kW, PDPM150G6F, PDPM175G6H, 150, PDPM150L6F specifications

The APC PDPM150L6F, PDPM175G6H, and PDPM150G6F are high-performance power distribution modules designed for specialized applications requiring reliable and efficient power management. With a power output of 150 kW and 175 kW respectively, these modules are engineered to meet the demands of modern data centers, industrial setups, and critical infrastructure.

One of the standout features of the APC PDPM series is its robust design, ensuring durability and longevity in challenging conditions. The modular architecture allows for flexible configuration and easy scalability, enabling users to adjust their power distribution needs as their operations grow. This adaptability is ideal for environments where power requirements fluctuate or expand over time.

The PDPM series utilizes advanced power management technologies that enhance efficiency and minimize energy loss. These modules incorporate intelligent load management systems that optimize power distribution, ensuring balanced loads across all connected devices. This not only improves overall system performance but also extends the lifespan of equipment by preventing overload conditions.

Another key characteristic of the APC PDPM150L6F, PDPM175G6H, and PDPM150G6F is their high reliability. Each unit is designed with redundant components and advanced monitoring capabilities, allowing for real-time diagnostics and alerts. This proactive approach ensures that potential issues are identified and addressed before they can impact operations, significantly reducing downtime.

Additionally, the user-friendly interface of these modules facilitates easy setup and configuration. Operators can quickly access essential information, including power usage data and system status, enhancing operational transparency. The integration of intelligent software tools further simplifies management tasks and enables remote monitoring, making it easier for facility managers to maintain optimal performance levels.

In summary, the APC PDPM150L6F, PDPM175G6H, and PDPM150G6F power distribution modules stand out for their efficiency, reliability, and scalability. Equipped with advanced technologies and designed for ease of use, these modules are an excellent choice for businesses looking to enhance their power management capabilities in an increasingly demanding technological landscape. Whether for data centers or critical infrastructure, the PDPM series delivers the performance that modern operations require.