APC SUA1000US, SUA750RM1U user manual UPS. Use only interface kits supplied or approved by APC

Page 7

1.Connect equipment to the UPS. Note: Do not connect a laser printer to the UPS. A laser printer draws significantly more power than other types of equipment and may overload the UPS.

2.Add any optional accessories to the Smart-Slot.

3.Using a power cord, plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension cords.

•120/100V models: The power cord is permanently attached to the rear panel of the UPS.

4.Turn on all connected equipment. To use the UPS as a master ON/OFF switch, be sure all con- nected equipment is switched ON. The equipment will not be powered until the UPS is turned on.

5.To power up the UPS press the button on the front panel.

•The UPS charges its battery when it is connected to utility power. The battery charges to 90% capacity during the first three hours of normal operation. Do not expect full battery run capability during this initial charge period.

•120V Models: Check the site wiring fault LED located on the rear panel. It lights up if the UPS is plugged into an improperly wired utility power outlet. Refer to Troubleshooting in this manual.

6.For additional computer system security, install PowerChutePlus® Smart-UPS monitoring soft- ware.

BASIC CONNECTORS

Serial Port

USB Port Power management software and interface kits can be used with the

 

UPS. Use only interface kits supplied or approved by APC.

Use an APC supplied cable to connect to the Serial Port. DO NOT use a standard serial interface cable since it is incompatible with the UPS connector.

Both Serial and USB Ports are provided. They cannot be used simultaneously.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents APC Smart-UPS Page Unpacking IntroductionPositioning the UPS Installing the Rails in the Rack Mounting the UPS in a Rack Connecting Equipment and Power to the UPS UPS. Use only interface kits supplied or approved by APC Operation On Battery Operation User Configurable Items 230V models Disconnecting the Battery for Transport Replacing the Battery ModuleStorage Troubleshooting 120V models only. Site wiring Utility Voltage Contacting APC Service230V Models Regulatory Agency Approvals and Radio Frequency WarningsDeclaration of Conformity Limited Warranty

SUA1000US, SUA750RM1U specifications

The APC SUA750RM1U and SUA1000US are highly-regarded uninterruptible power supplies (UPS) designed to provide reliable power protection for critical electronic equipment. These models are part of APC's Smart UPS series, known for their superior performance and advanced technology.

The APC SUA750RM1U is a 750VA rack-mounted model that is perfect for data centers, server rooms, and other environments where space is at a premium. It offers a sleek 1U form factor, making it easy to integrate into existing rack systems. This unit features pure sine wave output, ensuring that sensitive electronics receive clean and stable power, which is crucial for maintaining optimal performance and longevity.

The SUA750RM1U also has a multiple outlet configuration, including both NEMA 5-15R and NEMA L5-30R outlets, allowing flexibility in connecting various devices. Its internal battery provides around 42 minutes of backup power at half load, which is vital during unexpected power outages. Additionally, the built-in LCD interface offers real-time information about the UPS status, such as power, battery life, and load level.

The APC SUA1000US, on the other hand, provides a larger 1000VA capacity, making it suitable for a wider range of applications, including critical systems and networking equipment. Like the SUA750RM1U, this unit also delivers pure sine wave output for superior performance. The SUA1000US is equipped with additional features such as automatic voltage regulation (AVR) that ensures the connected devices receive stable voltage levels regardless of fluctuations in the input supply.

Both models utilize APC’s SmartConnect technology, enabling users to manage their UPS systems remotely via a secure cloud connection. This feature allows for real-time monitoring, alerts, and notifications directly to a smartphone or computer, enhancing usability and ensuring peace of mind. They also support USB and serial connectivity for seamless integration with IT management software.

In addition to their impressive specifications, both the SUA750RM1U and SUA1000US incorporate advanced management features, such as energy-saving capabilities and customizable alerts. They are also engineered with a hot-swappable battery design, allowing users to replace the batteries without powering down connected equipment.

In conclusion, the APC SUA750RM1U and SUA1000US are exemplary UPS solutions that combine advanced technologies, top-tier performance, and intuitive management features. They are essential devices for ensuring the reliability and safety of sensitive electronic equipment in both professional and personal environments.
Top Page Image Contents