APC SUA48RMXLBP3U manual APC Worldwide Customer Support, Service

Page 10

Maintenance and Service

Service

If the unit requires service do not return it to the dealer. Follow these steps:

1.If the problem persists, contact APC Customer Support through the APC Web site, www.apc.com.

Note the model number of the unit, the serial number located on the back of the unit, and the date purchased. If you call APC Customer Support, a technician will ask you to describe the problem and attempt to solve it over the phone. If this is not possible, the technician will issue a Returned Material Authorization Number (RMA#).

If the unit is under warranty, repairs are free.

Procedures for servicing or returning products may vary internationally. Refer to the APC Web site for country specific instructions.

2.Pack the unit in its original packaging. If this is not available, refer to www.apc.com for information about obtaining a new set.

Pack the unit properly to avoid damage in transit. Never use Styrofoam beads for packaging. Damage sustained in transit is not covered under warranty.

Always DISCONNECT THE BATTERY before shipping in compliance with U.S. Department of Transportation (DOT) and IATA regulations. The battery(s) may remain in the unit.

3.Mark the RMA# on the outside of the package.

4.Return the unit by insured, prepaid carrier to the address given to you by Customer Support.

APC Worldwide Customer Support

Customer support for this or any other APC product is available at no charge in any of the following ways:

Refer to the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests.

www.apc.com (Corporate Headquarters)

Connect to localized APC Web sites for specific countries, each of which provides customer support information.

www.apc.com/support/

Global support searching APC Knowledge Base and using e-support.

Contact an APC Customer Support center by telephone or e-mail. Local, country-specific centers:

go to www.apc.com/support/contact for information.

Contact the APC representative or other distributor from whom you purchased your APC product for information on how to obtain local customer support.

10

SUA48RMXLBP3U/SUA48RMXLBPJ3U External Battery Pack User Manual

Image 10
Contents Smart-UPSXL Page About this Unit Read the Safety Guide before installing the unitIntroduction UnpackSpecifications Install the Rails in the Rack InstallationInstall the Battery Pack in the Rack Connect the External Battery Packs Configure UPS connection settings using NMC terminal mode Configure UPS parametersUser Name apc Password apc Press 2 and Enter to change Battery Settings Press 3 and Enter to select ConfigurationConfigure UPS connection settings using UPS terminal mode Maintenance and Service Replacing the Battery ModuleService APC Worldwide Customer SupportTwo-YearLimited Warranty Terms of warranty