APC SUA48RMXLBP3U manual Maintenance and Service, Replacing the Battery Module

Page 9

Maintenance and Service

Maintenance and Service

Replacing the Battery Module

This unit has two replaceable, hot-swappable battery modules. Replacement is a safe procedure, isolated from electrical hazards. Leave the external battery pack(s) and connected equipment on during the replacement procedure.

Once the batteries are disconnected the connected equipment is not protected from power outages.

Refer to the appropriate replacement battery user manual for battery module installation instructions. See your dealer or contact APC at www.apc.com or http://upgrade.apc.com for information on replacement battery modules.

Be sure to deliver the spent battery(s) to a recycling facility or ship it to APC in the replacement battery packing material.

SUA48RMXLBP3U/SUA48RMXLBPJ3U External Battery Pack User Manual

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Smart-UPSXL Page Introduction Read the Safety Guide before installing the unitAbout this Unit UnpackSpecifications Installation Install the Rails in the RackInstall the Battery Pack in the Rack Connect the External Battery Packs Configure UPS parameters Configure UPS connection settings using NMC terminal modeUser Name apc Password apc Press 3 and Enter to select Configuration Press 2 and Enter to change Battery SettingsConfigure UPS connection settings using UPS terminal mode Replacing the Battery Module Maintenance and ServiceAPC Worldwide Customer Support ServiceTerms of warranty Two-YearLimited Warranty
Top Page Image Contents