APC SUA48RMXLBP3U manual Introduction, About this Unit, Unpack

Page 3

Introduction

Introduction

About this Unit

The SUA48RMXLBP3U/SUA48RMXLBPJ3U connects to the APC Smart-UPS XL.Together these units provide extended protection from utility power blackouts, brownouts, sags and surges from reaching your electronic equipment.

Unpack

Read the Safety Guide before installing the unit.

Inspect the unit upon receipt. Notify the carrier and dealer if there is damage.

The packaging is recyclable; save it for reuse or dispose of it properly.

Check the package contents:

• External battery pack

Literature kit containing:

with two battery modules installed

• Two rack-mount brackets

• Bezel

• Eight flathead screws

• Rail kit

• Four cage nuts

 

• Product documentation

 

• Safety information

 

• Warranty information

NOTE: The model and serial numbers are located on a small, rear panel label. For some models, an additional label is located on the chassis under the front bezel.

SUA48RMXLBP3U/SUA48RMXLBPJ3U External Battery Pack User Manual

3

Image 3
Contents Smart-UPSXL Page Unpack Read the Safety Guide before installing the unitIntroduction About this UnitSpecifications Installation Install the Rails in the RackInstall the Battery Pack in the Rack Connect the External Battery Packs Configure UPS parameters Configure UPS connection settings using NMC terminal modeUser Name apc Password apc Press 3 and Enter to select Configuration Press 2 and Enter to change Battery SettingsConfigure UPS connection settings using UPS terminal mode Replacing the Battery Module Maintenance and ServiceAPC Worldwide Customer Support ServiceTerms of warranty Two-YearLimited Warranty