APC 2200VA, 3000VA user manual ALL Indicators are LIT and the UPS Emits a Constant Beeping

Page 22

PROBLEM AND POSSIBLE CAUSE

SOLUTION

ALL INDICATORS ARE LIT AND THE UPS EMITS A CONSTANT BEEPING

Internal UPS fault.

Do not attempt to use the UPS. Turn the UPS off and have it

 

serviced immediately.

 

 

ALL INDICATORS ARE OFF AND THE UPS IS PLUGGED INTO A WALL OUTLET

The UPS is shut down and the bat-

None. The UPS will return to normal operation when the power

tery is discharged from an extended

is restored and the battery has a sufficient charge.

outage.

 

 

 

THE REPLACE BATTERY LED IS LIT

 

Weak battery.

Allow the battery to recharge for at least four hours. Then, per-

 

form a self-test. If the problem persists after recharging, replace

 

the battery.

Replacement battery not connected

Check that the battery connector is fully engaged.

properly.

 

 

 

20

Image 22
Contents APC Smart-UPS Page Safety Information Electrical Safety Battery Safety Installation Enough to handle the weightInstalling the Mounting Rails in the Rack Battery face plate Facing the front of the UPS, locate the battery Accessories Operation 230V Ity voltage 120V Models Low Battery Warning Level OAD VA User Configuration Items UPS ID UpsidenHigh Transfer Storage and Maintenance Transporting Your SMART-UPS Troubleshooting ALL Indicators are LIT and the UPS Emits a Constant Beeping Service CONTACT, REGULATORY, and Warranty Information 230V ModelsDeclaration of Conformity Limited Warranty