APC 2200, 3000, 1500 operation manual Troubleshooting, UPS is emitting an audible beeping sound

Page 15

Troubleshooting

Problem and Possible Cause

Solution

 

The UPS will not turn on or there is no output

 

 

The unit has not been turned on.

Press the ON button once to turn on the UPS.

 

 

The UPS is not connected to utility

Ensure that the power cable is securely connected to the unit and to the utility

power.

power supply.

 

 

The input circuit breaker has tripped.

Reduce the load to the UPS, disconnect nonessential equipment and reset the

 

circuit breaker.

The unit shows very low or no input utility voltage.

Check the AC power supply to the UPS by plugging in a table lamp. If the light is very dim, check the utility voltage.

The battery connector plug is not securely Ensure that all battery connections are secure. connected.

There is an internal UPS fault.

Do not attempt to use the UPS. Unplug the UPS and have it serviced immediately.

The UPS is operating on battery, while connected to input utility power

The input circuit breaker has tripped.

Reduce the load to the UPS, disconnect nonessential equipment and reset the

 

circuit breaker.

 

 

There is very high, very low, or distorted

Move the UPS to a different outlet on a different circuit. Test the input voltage

input line voltage.

with the utility voltage display. If acceptable to the connected equipment,

 

reduce the UPS sensitivity.

 

UPS is emitting an audible beeping sound

 

 

The UPS is in normal operation.

None. The UPS is protecting the connected equipment.

UPS does not provide expected backup time

The UPS battery is weak due to a recent outage or is near the end of its service life.

Charge the battery. Batteries require recharging after extended outages and wear out faster when put into service often or when operated at elevated temperatures. If the battery is near the end of its service life, consider replacing the battery even if the replace battery indicator is not yet illuminated.

The UPS is overloaded.

Check the UPS load display. Unplug unnecessary equipment, such as printers.

 

Display interface indicators flash sequentially

 

 

The UPS has been shut down remotely

None. The UPS will restart automatically when utility power returns.

through software or an optional accessory

 

card.

 

The Fault indicator is lit and the UPS displays a fault message and emits a constant beeping sound

Internal UPS fault.

Do not attempt to use the UPS. Turn the UPS off and have it serviced

 

immediately.

 

 

All indicators are illuminated and the UPS is plugged into a wall outlet

The UPS has shut down and the battery has discharged from an extended outage.

None. The UPS will return to normal operation when the power is restored and the battery has a sufficient charge.

12

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Smart-UPSUPS Contents Smart-UPS Factory Warranty Product Overview SafetyOverview Product DescriptionRear panels 1000/1500 VA 120 Vac 750 VA 120 Vac1000/1500 VA 230 Vac Operating Conditions SpecificationsInstallation Environmental SpecificationsRear Panel Features OperationConnect Equipment to the UPS Standard menus Using the display interfaceDisplay Interface OverviewAdvanced menus General Settings ConfigurationUPS Settings Start-up SettingsSetting Low BatteryBattery Replacement Audible Alarm Battery SelfUsing the Main Outlet Group and the Switched Outlet Group Main Outlet Group and the Switched Outlet GroupNetwork Management Card Settings Normally closed contacts Emergency Power OffEPO Overview Normally open contactsUPS is emitting an audible beeping sound TroubleshootingUPS does not provide expected backup time Display interface indicators flash sequentiallyProblem and Possible Cause Replace battery indicator is illuminatedDisplay interface has a Site Wiring Fault message Service Service and SupportAPC Worldwide Customer Support Transport the unitLimited Warranty Smart-UPS Factory WarrantyModel Numbers Harmonized StandardsApplicable Council Directives Type of Equipment990-3534-001 06/2009
Related manuals
Manual 8 pages 29.77 Kb Manual 58 pages 30.91 Kb Manual 2 pages 10.71 Kb Manual 2 pages 59.91 Kb Manual 1 pages 56.02 Kb

3000, 2200, 1500 specifications

The APC 3000 and 4000 series are advanced uninterruptible power supply (UPS) systems designed to provide reliable and efficient power protection for a variety of applications. These systems play a crucial role in safeguarding sensitive electronic equipment from power disturbances, including surges, sags, and complete power outages.

Both the APC 3000 and 4000 models come equipped with a robust set of features engineered to improve performance and optimize energy efficiency. One notable characteristic is their sine wave output, which ensures smooth and dependable power delivery, essential for maintaining the proper functionality of connected devices.

Key technologies integrated into these models include advanced battery management systems that extend the life of the batteries and enhance overall performance. The UPS units utilize high-frequency technology, which minimizes the size and weight of the system while maximizing output power. This enables both the APC 3000 and 4000 to fit seamlessly into various environments, from data centers to small offices.

In addition to their compact design, the APC 3000 and 4000 series feature easy-to-read LCD displays providing real-time information on critical parameters such as battery status, load level, and remaining runtime. This feature allows users to monitor performance and make informed decisions about power management effortlessly.

Another vital aspect of the APC 3000 and 4000 series is their expansion capabilities. Both models offer additional battery packs, allowing users to increase runtime as needed. These UPS systems also support hot-swappable batteries, making maintenance quick and efficient, minimizing downtime during service and repairs.

Furthermore, APC’s PowerChute software is compatible with the 3000 and 4000 series, allowing for easy management of power settings and the ability to configure user-defined power settings. This software also enables users to receive alerts for system status issues and performs scheduled shutdowns, ensuring data integrity during power failures.

Overall, the APC 3000 and 4000 series offer a combination of performance, reliability, and user-friendliness. These UPS systems are ideal choices for protecting critical electronic equipment and ensuring uninterrupted operations in various environments. Users looking for a dependable power solution will find that these models exceed expectations with their advanced features and robust technologies.
Top Page Image Contents