APC 1000VA Storage, Replacing the Battery Module, Disconnecting the Battery for Transport

Page 12

4: STORAGE, MAINTENANCE, AND TRANSPORTING

Storage

Store the UPS covered and positioned as for proper functioning, in a cool, dry location, with the bat- teries fully charged.

At -15 to +30 °C (+5 to +86 °F), charge the UPS battery every six months.

At +30 to +45 °C (+86 to +113 °F), charge the UPS battery every three months.

Replacing the Battery Module

This UPS has an easy to replace, hot-swappable battery module. Replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and connected equipment on for the follow- ing procedure. See your dealer or contact APC at the web site, www.apc.com for information on re- placement battery modules.

Once the battery is disconnected, the connected equipment is not protected from power outages.

Be careful during the following steps-the battery module is heavy.

Refer to Installing and Connecting the Battery and Attaching the Front Bezel, in this manual.

Reverse the instructions for battery removal.

Be sure to deliver the spent battery to a recycling facility or ship it to APC in the replacement battery packing material.

Disconnecting the Battery for Transport

Always DISCONNECT THE BATTERY before shipping in compliance with U.S. Department of Transportation (DOT) regulations.

The battery may remain in the UPS; it does not have to be removed.

1.Shut down and disconnect any equipment attached to the UPS.

2.Shut down and disconnect the UPS from the power supply.

3.Unplug the battery connector. Refer to Mounting the UPS in a Rack, Steps 1 and 2 in this man- ual.

For shipping instructions and to obtain appropriate packing materials contact APC at the web site, www.apc.com/support/contact.

10

Image 12
Contents APC Smart-UPS Page Introduction UnpackingPositioning the UPS Installing the Rails in the Rack Mounting the UPS in a Rack Connecting Equipment and Power to the UPS UPS. Use only interface kits supplied or approved by APC Operation On Battery Operation User Configurable Items 230V models Replacing the Battery Module Disconnecting the Battery for TransportStorage Troubleshooting 120V models only. Site wiring Utility Voltage Service Contacting APCRegulatory Agency Approvals and Radio Frequency Warnings 230V ModelsDeclaration of Conformity Limited Warranty
Related manuals
Manual 1 pages 62.02 Kb

1000VA specifications

The APC 1000VA is a robust uninterruptible power supply (UPS) designed to provide reliable backup power and surge protection for small to medium-sized office equipment. This device is especially critical for safeguarding sensitive electronics such as computers, networking equipment, and telecommunication systems from unexpected power outages and fluctuations.

One of the standout features of the APC 1000VA is its high-capacity output of 1000 volt-amperes (VA), ensuring that it can handle the power demands of multiple devices simultaneously. The UPS delivers a pure sine wave output, which mimics the utility power supply, ensuring greater compatibility with a wider range of sensitive electronics. This feature is particularly beneficial for equipment that requires stable power input to function optimally.

In terms of connectivity, the APC 1000VA is equipped with several outlets, allowing users to connect multiple devices while providing sufficient backup power during outages. The UPS also features USB and serial communication ports, enabling users to interface the unit with computers for monitoring and management purposes. This integration allows for automatic shutdown software, which protects data integrity by safely powering down devices during extended outages.

The APC 1000VA incorporates advanced battery management technologies, including automatic battery testing and smart battery charging, which extend the life of the internal batteries and improve overall performance. The unit is designed to easily maintain its battery health, minimizing the need for frequent replacements and reducing long-term ownership costs.

With a compact design, the APC 1000VA is easy to install and fits well in various environments, from home offices to small business settings. The audible alarms provide alerts for power conditions, ensuring users are always aware of their power scenario.

In addition to these features, the APC 1000VA includes essential safety protections such as overload protection, short-circuit protections, and temperature-regulated battery charging. These safety measures contribute to the reliability and longevity of the UPS.

Overall, the APC 1000VA combines performance, versatility, and reliability, making it an ideal choice for anyone needing an efficient power backup solution to protect vital equipment from power irregularities. With its solid construction and reliable technology, it stands out as a dependable ally in maintaining power continuity in various settings.