APC 1000VA user manual UPS. Use only interface kits supplied or approved by APC

Page 7

1.Connect equipment to the UPS. Note: Do not connect a laser printer to the UPS. A laser printer draws significantly more power than other types of equipment and may overload the UPS.

2.Add any optional accessories to the Smart-Slot.

3.Using a power cord, plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension cords.

•120/100V models: The power cord is permanently attached to the rear panel of the UPS.

4.Turn on all connected equipment. To use the UPS as a master ON/OFF switch, be sure all con- nected equipment is switched ON. The equipment will not be powered until the UPS is turned on.

5.To power up the UPS press the button on the front panel.

•The UPS charges its battery when it is connected to utility power. The battery charges to 90% capacity during the first three hours of normal operation. Do not expect full battery run capability during this initial charge period.

•120V Models: Check the site wiring fault LED located on the rear panel. It lights up if the UPS is plugged into an improperly wired utility power outlet. Refer to Troubleshooting in this manual.

6.For additional computer system security, install PowerChutePlus® Smart-UPS monitoring soft- ware.

BASIC CONNECTORS

Serial Port

USB Port Power management software and interface kits can be used with the

 

UPS. Use only interface kits supplied or approved by APC.

Use an APC supplied cable to connect to the Serial Port. DO NOT use a standard serial interface cable since it is incompatible with the UPS connector.

Both Serial and USB Ports are provided. They cannot be used simultaneously.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents APC Smart-UPS Page Unpacking IntroductionPositioning the UPS Installing the Rails in the Rack Mounting the UPS in a Rack Connecting Equipment and Power to the UPS UPS. Use only interface kits supplied or approved by APC Operation On Battery Operation User Configurable Items 230V models Disconnecting the Battery for Transport Replacing the Battery ModuleStorage Troubleshooting 120V models only. Site wiring Utility Voltage Contacting APC Service230V Models Regulatory Agency Approvals and Radio Frequency WarningsDeclaration of Conformity Limited Warranty
Related manuals
Manual 1 pages 62.02 Kb

1000VA specifications

The APC 1000VA is a robust uninterruptible power supply (UPS) designed to provide reliable backup power and surge protection for small to medium-sized office equipment. This device is especially critical for safeguarding sensitive electronics such as computers, networking equipment, and telecommunication systems from unexpected power outages and fluctuations.

One of the standout features of the APC 1000VA is its high-capacity output of 1000 volt-amperes (VA), ensuring that it can handle the power demands of multiple devices simultaneously. The UPS delivers a pure sine wave output, which mimics the utility power supply, ensuring greater compatibility with a wider range of sensitive electronics. This feature is particularly beneficial for equipment that requires stable power input to function optimally.

In terms of connectivity, the APC 1000VA is equipped with several outlets, allowing users to connect multiple devices while providing sufficient backup power during outages. The UPS also features USB and serial communication ports, enabling users to interface the unit with computers for monitoring and management purposes. This integration allows for automatic shutdown software, which protects data integrity by safely powering down devices during extended outages.

The APC 1000VA incorporates advanced battery management technologies, including automatic battery testing and smart battery charging, which extend the life of the internal batteries and improve overall performance. The unit is designed to easily maintain its battery health, minimizing the need for frequent replacements and reducing long-term ownership costs.

With a compact design, the APC 1000VA is easy to install and fits well in various environments, from home offices to small business settings. The audible alarms provide alerts for power conditions, ensuring users are always aware of their power scenario.

In addition to these features, the APC 1000VA includes essential safety protections such as overload protection, short-circuit protections, and temperature-regulated battery charging. These safety measures contribute to the reliability and longevity of the UPS.

Overall, the APC 1000VA combines performance, versatility, and reliability, making it an ideal choice for anyone needing an efficient power backup solution to protect vital equipment from power irregularities. With its solid construction and reliable technology, it stands out as a dependable ally in maintaining power continuity in various settings.
Top Page Image Contents