Fellowes M1-95, L80-95 manual Capabilities

DO NOT leave the power cord in contact with hot surfaces.

DO NOT leave power cord hanging from cupboards or shelves.

DO NOT use appliance if the power cord is damaged.

DO NOT attempt to open or otherwise repair the machine.

DO NOT exceed the machines quoted performance.

DO NOT allow children to use this machine without adult supervision.

DO NOT laminate sharp or metal objects (eg: staples, paper clips).

DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot settings.

DO NOT laminate with self-adhesive pouches on hot settings.

DO NOT laminate an empty pouch.

ENGLISH			E
LAMINATOR CONTROLS
	A	On / off switch		D	Pouch / document entry slot
	B	Ready LED		E	Pouch / document exit
	C	Release lever (	)	F	Power on LED

CAPABILITIES

Performance
Format	9.5” / 240mm
Entry width	A4 = 240mm
Pouch thickness	3 mil (per side)
Warm up time (estimate)	3 minutes
Cool down time	60-90 minutes
Lamination speed	approx. 12”/min
(+/- 5%)	(fixed speed)
Number of rollers	2
Ready indication	Light
Release lever	Yes
Clear Path / Anti-jam engine	Yes

Technical Data
Voltage / Frequency /
Current(Amps)	110-120V AC, 60Hz, 2.5A
Wattage	300 Watts
Dimensions (HxWxD)	1.75” x 8.25” x 13.5”
Net weight	3lb
Max document thickness
(laminating capacity)	.040” / 1 mm

IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE

-The machine is for indoor use only. Plug the machine into an easily accessible socket.

-To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.

DO ensure the machine is on a stable surface.

DO test laminate scrap sheets and set the machine before final laminations.

DO remove staples and other metal articles prior to laminating.

DO keep the machine away from heat and water sources. DO turn off the machine after each use.

DO unplug the machine when not in use for an extended period.

DO use pouches designed for use at the appropriate settings.

DO keep away from pets, while in use.

4

407534C M1-95.indd 4

4/23/13 1:12 PM